WEEK 6 June 26- 30, 2017
Tuesday June 27, 2017
Posts
WEEK 4, June 12 - 16, 2017
Monday June 12, 2017 Worked on the new Circuit Board (Enes, Sam, Jonny). Update: Instead of using the BeagleBone, the Arduino ONE Board will be used because it received a signal from the Spot GPS, unlike the BeagleBone. Camera Duration Results (Grecia) GoPro Update: The GoPro started to freeze and it wouldn't restart until the battery was completely out. After contacting GoPro help support, it was discovered that it was due the use of the wrong SD card (Samsung evo). The correct SD Cards recommended for the GoPro Hero Session are the following SD Cards Recommended Samsung Gear 360 Update: The reason why the Samsung 360 lasted for about 20 minutes was due to an overheating problem. Further research showed that the overheating is a very common issue for the Samsung 360. The following step would be to program the Samsung 360 to turn on after about an hour in the air to capture some footage in 360 degrees. Kodak 270 Update: This camera can only work with a 32...
